|
Post by Lucid on Dec 16, 2007 17:21:19 GMT -5
It was a good cruise for Jim and I. We had fun driving over there. Lots of really really nice third gens were out there.
No rain, and plenty of cold air. Perfect drive for a spirited cruise.
|
|
|
Post by Jim on Dec 18, 2007 2:10:36 GMT -5
Definitely, we left a tad bit late so driving at 90-100mph some of the way there was fun. Very nice cars, too bad they all started leaving pretty much as soon as we got there.
|
|
|
Post by lostjondoe on Dec 18, 2007 16:35:12 GMT -5
really as soon as ya'll got there? was it a big meet, well all i fixed my car i just had to wait until moday so i can get paid got it started in about an hour and i just got home from pick n' pullgot a couple of things for my interior. ohh yea any one know how to fix a jammed door i mean this things just won't open if any one thinks they can give me some help on what to do.
|
|
|
Post by Jim on Dec 19, 2007 1:26:46 GMT -5
Won't open?? Because of the cold? or what?
|
|
|
Post by lostjondoe on Dec 21, 2007 15:11:02 GMT -5
na it just like jammed i guess i put a new door handle on the inside driver side and it was working for like two weeks and then the door just gave up, the door is unlocked and nuthin i do can open itso its a good thing i have t-tops
|
|
|
Post by Lucid on Dec 21, 2007 22:36:12 GMT -5
Do you hear the linkage inside actually working when you pull up on the handle? If the linkage came off and is just hanging inside the door, its not going to open.
You might be able to see it working if you look down inside where the glass is.
Try pulling up on the door when you are pulling up on the handle and see if it will come off the door catch. If the door is misaligned it might have just gotten stuck.
|
|
|
Post by lostjondoe on Dec 24, 2007 4:51:34 GMT -5
lucid no to the linkage the linkage works but the on the passenger and the driver door got to the point that u had to give it a little tug up to open either door, from the outside. and the passenger well it doesn't have a internal door handle. so how do align the doors again
|
|
|
Post by Jim on Dec 24, 2007 13:54:05 GMT -5
Your going to need to replace the door pins. The alignment is fine. Never done it before but I would like to try it before my doors start to do that.
|
|
|
Post by lostjondoe on Dec 24, 2007 22:07:43 GMT -5
see but idon't know how to get to the pins if the doors won't open
|
|
|
Post by Jim on Jan 10, 2008 12:35:32 GMT -5
The doors won't open at all??
|
|