84maroonta
Full Member
350 .30 over, Vortec heads, 10:1 flat top pistons, Edelbrock RPM AIRGAP T5tranny w/ 3.73's
Posts: 103
|
Post by 84maroonta on Feb 8, 2007 1:08:36 GMT -5
Sat who wants to help do some motor/ Tranny pulling with thomas and I?
|
|
|
Post by Jim on Feb 8, 2007 2:48:57 GMT -5
Don't remember what I work. Let you know tommorow.
|
|
84maroonta
Full Member
350 .30 over, Vortec heads, 10:1 flat top pistons, Edelbrock RPM AIRGAP T5tranny w/ 3.73's
Posts: 103
|
Post by 84maroonta on Feb 8, 2007 12:28:26 GMT -5
We are doing it saturday, on Randolf so we can use a lift
|
|
urslo
New Member
Posts: 25
|
Post by urslo on Feb 8, 2007 22:15:52 GMT -5
Ft. Sam not Randolph
|
|
|
Post by Jim on Feb 9, 2007 23:51:19 GMT -5
I get out at 4pm, send me a PM with your number and i'll let you know if I can make it.
|
|
|
Post by Lucid on Feb 10, 2007 23:08:47 GMT -5
I would have gone man, but my girl has a 2002 Buick Rendezvous and it took me and her brother 3 hours to dissassemble the car enough to just even access the radiator.
I had to take off the motor mounts, take off the body braces, remove the air deflector, remove the bolts from the fan, remove the fuse block box and overfill tank, remove the battery, remove the radiator fans, just to get to the radiator.
|
|
|
Post by Jim on Feb 11, 2007 12:20:04 GMT -5
I had to take off the motor mounts, take off the body braces, remove the air deflector, remove the bolts from the fan, remove the fuse block box and overfill tank, remove the battery, remove the radiator fans, just to get to the radiator. That's why i'll never own a newer car. Atleast any luxury/passenger cars. The sports cars don't seem to have that problem.
|
|
84maroonta
Full Member
350 .30 over, Vortec heads, 10:1 flat top pistons, Edelbrock RPM AIRGAP T5tranny w/ 3.73's
Posts: 103
|
Post by 84maroonta on Feb 11, 2007 19:20:24 GMT -5
yeah, We got it done. Thomas is fast at taking those apart. In the next week Ill be taking mine out one day, clean the next day. and then Probably put it together the following weekend
|
|
|
Post by Lucid on Feb 11, 2007 21:09:02 GMT -5
Thats good to hear you got it done. I was about to call Thomas on Saturday and the i realized he was busy, i had no idea how to take this car apart.
Jim, it was a pain in the ass, believe me when i had to yank the battery i stomped around her garage pissed off. I still have to get the new radiator, put it in and then reassemble everything.
My car is still down, dont know when i will have time to work on it again.
|
|
|
Post by Jim on Feb 12, 2007 0:34:35 GMT -5
I have tommorow and friday off...
|
|
84maroonta
Full Member
350 .30 over, Vortec heads, 10:1 flat top pistons, Edelbrock RPM AIRGAP T5tranny w/ 3.73's
Posts: 103
|
Post by 84maroonta on Feb 15, 2007 2:28:37 GMT -5
Jim I just got your message today, Sorry I missed your call man.
|
|
|
Post by Jim on Feb 15, 2007 16:58:55 GMT -5
That's alright, i've got tommorow off as well. I'd like to get the ball rolling on the body work. Do you know of anywhere to start this? My apartment complex won't allow me to work on my car here. How much is it at Randolph to use the garages??
|
|
84maroonta
Full Member
350 .30 over, Vortec heads, 10:1 flat top pistons, Edelbrock RPM AIRGAP T5tranny w/ 3.73's
Posts: 103
|
Post by 84maroonta on Feb 16, 2007 2:10:19 GMT -5
If you want to use my garage you can (at my apartment)
|
|
|
Post by Jim on Feb 16, 2007 17:58:35 GMT -5
Okay cool...i'll need to buy all body prep equipment. How soon is okay? I have thursday and friday off next week...i'm hoping to get almost all of it done in 2 whole days, and then have it primed. This weekend is 50% off everything at Pick-N-Pull so i'll be there.
POST #100!!!!
|
|
|
Post by Lucid on Feb 17, 2007 3:45:32 GMT -5
I am not sure i have time to go to pick-n-pull this weekend, if you all see a passenger side fender for a ground effects camaro in good shape with no dings let me know guys. I work 8 hours saturday and in the morning i have to meet my girl's mommy. Sunday i think im going bike riding and maybe i can go then.
|
|