|
Post by Jim on Aug 23, 2007 22:24:37 GMT -5
We need to set up a meet and hatch alignment day/bbq with the dew. Duff post a list of needed supplies to do this. Werd
|
|
Duff
New Member
319 rwhp/340FtLbs. 13.05 1/4 mile.
Posts: 34
|
Post by Duff on Aug 23, 2007 23:32:56 GMT -5
Straight from the tech article I wrote. . .:
Recommended tools for this endeavor:
Phillips screwdriver 13mm ratchet (the deep well is better) 7mm ratchet razor scraper adhesive weather-stripping caulking/gun roll of 1" masking tape Drill with 1/16 drill bit An extra set of hands (READ another person)
|
|
|
Post by z28camaroracer on Aug 27, 2007 22:21:40 GMT -5
Got my new weather strips in today so as soon as Duff post a date we will just have to find a place to do it.
I will supply the tools and some super black RTV to reglue the panels. I will have to pick up some tape.
|
|
|
Post by Jim on Aug 27, 2007 22:36:31 GMT -5
Where did you get the weather strips? I'd like to do it at the same time as you do. Make it a hatch alignment day.
|
|
|
Post by irocvirrilli on Aug 27, 2007 23:03:24 GMT -5
same here, and since we'll be htere i can do my hatch hinges as well
|
|
|
Post by z28camaroracer on Aug 28, 2007 0:28:51 GMT -5
Ebay the set was under 150 for a hard top, I don't know if they have a set for t top cars. It came with door seals, the window seals, and the hatch
|
|