|
Post by camaroracer89 on Feb 13, 2008 21:25:04 GMT -5
i need wheel spacers for my 89 camaro i have rims that came off of a 96 camaro idk what size i need but need them.
|
|
|
Post by silver88iroc on Feb 14, 2008 18:04:41 GMT -5
you need to do the math.....i have 17x8.50 zr1s up front an 9.50s in the rear.....i have a 11/2 inch spacer on one set.....find out the cars stock wheel offset....then you need to find out the offset that the wheels your putting on there.....do the math an you should be able to come up with the perfect spacers....
|
|
|
Post by silver88iroc on Feb 14, 2008 18:07:42 GMT -5
i called for you....the stock 16inch rim offset on an 88 camaro is a +10 to 15mm
|
|
|
Post by silver88iroc on Feb 14, 2008 18:08:59 GMT -5
i think my zr1s are a +38mm up front...so i needed a spacer to accomidate that gap of 38mm to 12mm....
make sense?
|
|
|
Post by Jim on Feb 14, 2008 23:16:33 GMT -5
I have 3 sitting in my garage and I looked for them online and found them for I think it was $60+shipping per spacer. The spacers I got I pulled off a 3rd gen camaro that was running 4th gen wheels...exactly what your doing. I'll sell you the 3 I have for $100.
|
|
|
Post by silver88iroc on Feb 15, 2008 13:24:48 GMT -5
if you get the right ones....ive squeezed 315/35/17s in the back with just a little tapping on the inside of the fender wells
|
|