|
Post by EricFormula350 on Mar 11, 2011 20:16:13 GMT -5
This weekend I'm replacing my stock coolant overflow with a 4th gen overflow/battery tray. The stock tank looks ugly and takes up so much space. Should clean things up even more!
|
|
|
Post by EricFormula350 on Mar 12, 2011 20:53:07 GMT -5
|
|
|
Post by Lucid on Mar 13, 2011 0:30:45 GMT -5
Pictures ?
|
|
|
Post by EricFormula350 on Mar 13, 2011 8:16:51 GMT -5
I made a thread in the Cooling section of the board with pictures included.
|
|
|
Post by morbital on Mar 15, 2011 21:11:54 GMT -5
hey im planning on doing that.. would like to see the end results! im sure it looks way better than our bulky overflow tanks..
|
|
|
Post by EricFormula350 on Mar 16, 2011 17:38:53 GMT -5
it looks much better!
|
|
|
Post by townaj on Mar 21, 2011 19:23:19 GMT -5
I just picked up a washer fluid tank from a 4th gen that im gonna try to put in. It should look a lot cleaner. I shouldve picked up a coolant bottle too but i didnt know how easy it was to do.
|
|
|
Post by EricFormula350 on Mar 21, 2011 19:31:12 GMT -5
Yup wasn't too bad. Autozone actually sells coolant overflow tanks that would be fairly easy to install behind the nose of a Camaro. You should look into it!
|
|
|
Post by townaj on Mar 21, 2011 19:52:48 GMT -5
Yeah I'll check it out. Only problem is the washer bottle takes up that whole gap in front of the radiator. So I'm gonna see if i can find a new coolant overflow bottle for under the battery. Hopefully I can pull it off haha
|
|
|
Post by EricFormula350 on Mar 21, 2011 20:44:29 GMT -5
Not difficult at all if you have a sawzall
|
|
|
Post by townaj on Mar 21, 2011 20:47:53 GMT -5
I actually found mine the other day. It made doing my exhaust soo much easier. I tend to be kinda...challenged sometimes though lol
|
|