|
Post by EricFormula350 on Mar 13, 2011 16:40:32 GMT -5
Actually this was a pretty straightforward project. All you really need is a sawzall w/ a few blades and a new nut and bolt to hold your new battery tray in place. I thought I would just have to cut the batter try in order for it to fit but I actually had to cut out a piece of the lower fender to clear the tank. Battery Tray: 4th Gen Tank: No going back now! Quick Paint Job: Installed: Battery: For those of you who do not have ground fx I would not suggest this: Much better:
|
|
|
Post by monkihead on Mar 22, 2011 9:32:51 GMT -5
after seeing it in person, that is amazing. A side pic by the fender where you fill it would probably get you the OOOO's and AAAAhh's
|
|
|
Post by EricFormula350 on Mar 22, 2011 18:51:01 GMT -5
Good cosmetic mod to unclutter the engine bay.
|
|