|
Post by morbital on Apr 28, 2011 18:41:48 GMT -5
youtu.be/WzWaOEP8aFEthose of you who hasn't heard it yet or wants to hear it again, here is a clip! ENJOY!
|
|
pabs
Full Member
Posts: 154
|
Post by pabs on Apr 29, 2011 13:40:05 GMT -5
That's nice man Ive been wanting to do that but Its too expensive
|
|
|
Post by morbital on May 7, 2011 17:34:37 GMT -5
tell me about it. i actually saved for this project for over 5 years! most of it was saving while i did research and find all the parts and legit Co.'s. in all i did it! all i need is brakes, susp. interior.. etc.. i am thinking of making it to an iroc clone.. and that's a big MAYBE!!
|
|
|
Post by Lucid on May 9, 2011 8:32:22 GMT -5
Thats what I did with my yellow Z28. I bought new IROC springs and installed them all the way around, installed KYB's, welded up a Wonderbar made out of round tubing, upgraded to Performance Suspension poly bushings and boxed the lower control arms and panhard rod.
When I redid the tie rods, center link, and pitman/idler arm I went completely TRW because they are so much beefier than other brands. It really made a difference.
|
|
|
Post by morbital on May 13, 2011 7:39:00 GMT -5
man im sure it did! our RS in this age really slacked! im sure saving for all the suspension esspecially when i make tight turns i feel the body flex at 40 mph going from 10east to 35 north.. that curve makes me do the twist with my car..
|
|